GA818-250BX
Our angle grinder with angle gear - for the scrubbing and leveling of cast-iron parts, steel parts, welding seams, non-ferrous metals of all types and rock, as well as for any other fabrication areas, such as the steel construction and container construction, for machine building, in foundries and concrete construction.
Advantages:
- For grinding or when used with cut-off wheels of type 27, 41/42, for the best-possible grinding results even on hard-to-reach areas
- High power output - 2,5 kW (5.51 HP)
- Spindle lock in the safety guard - similar to the GAT Grinders
- Increased lifespan (due to lubricated gearing instead of greased gearing)
- Use of micro-filter in the safety valve to limit the penetration of dirt particles.
- The screw for the oil-refilling has been equipped with a magnet to entrap metal particles.
Objednací číslo
6060970C
| Max. power output | 2500 W / 3.35 hp |
|---|---|
| Speed (no load) | 8500 min-1 |
| Weight | 4,4 kg / 9.70 lbs |
| Drive | vane motor |
| Assortment | Standard assortment |
| Start | safety lever |
| Design | Basic Design |
| Rotation | right |
| Air consumption (no load) | 1,3 m3/min / 45.90 cfm |
| Air consumption (loaded) | 2,6 m3/min / 91.81 cfm |
| Max. radial speed | 80 m/s / 262.5 ft/s |
| I.D. of water hose | 16 mm / .63 in |
| I.D. of grinding wheel | 22,23 mm / .87 in |
| O.D. of grinding wheel | 180 mm / 7.09 in |
| Max. thickness of grinding wheel | 10 mm / .39 in |
| Max. cutting depth | 54 mm / 2.13 in |
| Air connection | thread 1/2" female |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Pin wrench |
|
828832 |
|---|---|---|
| Hose nozzle G1/2"/LW 16 |
|
6013767 |
| O ring 18x2 mm |
|
802517 |
| Allen key 5 mm |
|
800448 |
Optional Accessories
| Swivel connector, G1/2"-12 mm, turnable |
|
6078628 |
|---|---|---|
| Nozzle, G1/2", turnable (around the axis) |
|
6021377 |
| Plug 27SF AK21SXN |
|
6072227 |
| Oil set for oil change in head, oil 150 ml |
|
6022831A |